Multi-Gen® generator probes are the better alternative to disposable plastic generator probes. This unique equipment is a reusable 7mm diameter generator probe manufactured from superior 316 stainless steel and PTFE, wich allows for homogenizing samples without cross contamination and without the need to stop and clean a generator between samples. A Multi-Gen generator probe can quickly lock into the special Multi-Gen® adapter to provide hands-free ejection of the probe, minimizing the chance of accidental contamination. Multi-Gen generato probes are offered in multi-packs of 12 or 24 for convenience.
|
Advantages over plastic disposable generator probes:
First advantage, Multi-Gen generator probes can process more difficult samples, including tough samples.
Second advantage, Multi-Gen generator probes can be sterilized by any method, including flaming and autoclaving.
Third advantage, Multi-Gen generator probes are more economical because of their ability to be reused an unlimited number of times not like the plastic disposable generator probes.
Multi-Gen 7 Features:
- Flat bottom design - ideal for liquid and soft samples
- Shaft Length, 7MM x 65MM - best for microtubes to 5ML tubes
Multi-Gen 7 XL Features:
- Open slotted tooth design - ideal for the softest to toughest of samples
- Longer shaft, 7MM x 115MM - perfect for sample volumes from microtubes to 50ML tubes
Click Here to view our Multi-Gen 7 Homogenizer Packages
07-07200
|
| Multi-Gen Motor Unit Adapter
|
02-070MG-12
|
| Multi-Gen 7 Homogenizer Generators (12/package)
|
02-070MG-24
|
| Multi-Gen 7 Homogenizer Generators (24/package)
|
02-070MGXL-12
|
| Multi-Gen 7 XL Homogenizer Generators (12/package)
|
80-00218
|
| Multi-Gen Ejector Clamp Assembly
For use with 80-00200 PRO200 Homogenizer Stand Assembly only. Includes: Post clamp assembly, cross rod assembly, ejector collar
|
03-11073P
|
| PTFE Bearings - Replacement PTFE bearings.
| | * Most recommended motor unit for use with Multi-Gen 7 |
|---|
01-01200
|
| PRO 200 Homogenizer 120v
|
01-02200
|
| PRO 200 Homogenizer 220v
|
80-00200
|
| PRO 200 Stand Assembly
|
|
Multi-Gen 7 Generator
7MM x 65 MM
Multi-Gen 7 XL Generator
7MM x 115 MM
- 316 stainless steel and PTFE construction allow for homogenization of tough tissue samples and for repeated autoclaving
- Eliminates the need for generator cleaning between samples
- Hands-free ejection of the used generator
- Ideal for molecular applications, PCR, and microtube assays
- Can be used with any PRO homogenizer motor unit
|
| |
|
Contact Us:
99 Willenbrock Rd.
Oxford CT 06478 USA
ph: (203) 267-4600
fax: (203) 267-4606
Copyright © 2004 - 2011 PRO Scientific Inc.
| |