|
|
|
UP & ULP
Universal Ovens
|
|
|
Ventilation and Control
- Natural convection in UP models
- Quiet air turbine in ULP models
- Adjustment of pre-heated fresh air admixture by air flap through process controller
- Vent connection with restrictor flap
- Adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
- Auto-diagnostic system with fault indication
- Integrated timer (adjustable from 1 min. up to 999 hours per ramp) for multiramp temperature profiles
- Multifunctional programming (menu on 5-digit LED digital display)*
- 5-digit LED digital display for temperature, time, air turbine speed** and air flap positions
- Program stored on power failure
- Parallel printer interface (incl. Real-time clock with date function) to connect an EPSON ESC/P2 compatible printer for GLP-conforming documentation
- Serial interface RS 232 including MEMMERT Software “Celsius 2000” Chip-card control incl. one Memory Card XL with 32 kb
- Incl. works calibration certificate for +160°C
Overheat Safety Device
- Microprocessor overheat controller, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880
Textured Stainless Steel Casing
- Fully insulated stainless steel door with double locking and 4-point adjustment***
- Rear zinc plated steel
- Model 800 mounted on lockable castors
Interior – Heating Concept
- Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
- From +30 C up to +220 C****
* Displays; tempering profiles with several ramps (up to 40); time- and set-point
dependent operation; air flap adjustable by servo-motor in 10% steps
** Air turbine speed displayed on ULP models only
*** Models 600 and up have two doors
**** However, at least 5°C above ambient for UP and 10°C above ambient for
ULP models
| MODEL
| WEIGHT (kg)
| CASING SIZE
w x h x d (mm)
| INTERIOR HEATING SIZE
w x h x d (mm)
| VOLUME (l)
| SUPPORT SHELVES
SUPPLIED/AVAILABLE
| AVAILABLE VOLTAGE
| UP 400
| 35
| 550 x 680 x 480
| 400 x 400 x 330
| 53
| 2/4
| 115 V, 60Hz
230 V, 60Hz
| ULP 400
| 40
| 550 x 680 x 480
| 400 x 400 x 330
| 53
| 2/4
| 115 V, 60Hz
230 V, 60Hz
| UP 500
| 50
| 710 x 760 x 550
| 560 x 480 x 400
| 108
| 2/5
| 115 V, 60Hz
230 V, 60Hz
| ULP 500
| 56
| 710 x 760 x 550
| 560 x 480 x 400
| 108
| 2/5
| 115 V, 60Hz
230 V, 60Hz
| UP 600
| 83
| 950 x 920 x 650
| 800 x 640 x 500
| 256
| 2/7
| 115 V, 60Hz
230 V, 60Hz
| ULP 600
| 94
| 950 x 920 x 650
| 800 x 640 x 500
| 256
| 2/7
| 115 V, 60Hz
230 V, 60Hz
| UP 700
| 111
| 1190 x 1080 x 650
| 1040 x 800 x 500
| 416
| 2/9
| 115 V, 60Hz 3 phase
230 V, 60Hz 3 phase
| ULP 700
| 134
| 1190 x 1080 x 650
| 1040 x 800 x 500
| 416
| 2/9
| 115 V, 60Hz 3 phase
230 V, 60Hz 3 phase
| UP 800
| 160
| 1190 x 1620 x 750
| 1040 x 1200 x 600
| 749
| 2/14
| 115 V, 60Hz 3 phase
230 V, 60Hz 3 phase
| ULP 800
| 180
| 1190 x 1620 x 750
| 1040 x 1200 x 600
| 749
| 2/14
| 230 V, 60Hz 3 phase
| 400 V, 60Hz 3 phase
| | | | | | | | | | | | | | | | | | | | |
|
|
|
| Copyright © 2008 PRO Scientific
| |