PRO Scientific manufactures homogenizers and laboratory equipment including: centifuges, rockers, shakers and mixers









Home | About Us | Contact Us | Login

Call Toll-Free 1-800-5-THE-PRO
e-mail: sales@PROScientific.com





Sterilizers

SM/SLM Sterilizer

Mechanical Controller


SE/SLE Sterilizer

Electronic Controller


SLP Sterilizer

Process Controller


For additional information please visit Memmert.com


SM & SLM Sterilizers
Hot Air Sterilizers
Ventilation and Control
  • Natural convection in SM models
  • Quiet air turbine in SLM models
  • Continuous adjustment of pre-heated fresh air admixture (for drying processes)
  • Vent connection with restrictor flap
  • Mechanical Memmert-controller (no Mercury)
  • Lockable, works-calibrated temperature
  • Digital temperature display
  • Timer 0-20h on 60Hz
Overheat Safety Device
  • Serial overheat controller, adjustable (TWW) protection class 3.1, according to DIN 12 880
Textured Stainless Steel Casing
  • Fully insulated stainless steel door with double locking and 4-point adjustment*
  • Rear zinc plated steel
  • Model 800 on lockable castors
Interior - Heating Concept
  • Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
  • From +30°C (however, at least 5°C above ambient) up to +220°C**

*     Models 600 and up have two stainless steel doors
**   However, at least 5°C above ambient for SM and 10°C above ambient for SLM models

MODEL WEIGHT (kg) CASING SIZE
w x h x d (mm)
INTERIOR HEATING SIZE
w x h x d (mm)
VOLUME (l) SUPPORT SHELVES
SUPPLIED/AVAILABLE
AVAILABLE VOLTAGE
SM 100 21 470 x 520 x 325 320 x 240 x 175 14 1/2 115 V, 60Hz
230 V, 60Hz
SM 200 29 550 x 600 x 400 400 x 320 x 250 32 1/3 115 V, 60Hz
230 V, 60Hz
SM 300 32 630 x 600 x 400 480 x 320 x 250 39 1/3 115 V, 60Hz
230 V, 60Hz
SM 400 35 550 x 680 x 480 400 X 400 X 330 53 2/4 115 V, 60Hz
230 V, 60Hz
SLM 400 40 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
SLM 500 56 710 x 760 x 550 560 x 480 x 400 108 2/5 115 V, 60Hz
230 V, 60Hz
SLM 600 94 950 x 920 x 650 800 x 640 x 500 256 2/7 115 V, 60Hz
230 V, 60Hz
SLM 700 134 1190 x 1080 x 650 1040 x 800 x 500 416 2/9 115 V, 60Hz
230 V, 60Hz
SLM 800 180 1190 x 1620 x 750 1040 x 1200 x 600 749 2/14 115 V, 60Hz
230 V, 60Hz



SE & SLE Sterilizers
Hot Air Sterilizers
Ventilation and Control
  • Natural convection
  • Quiet air turbine in ULE models
  • Continuous adjustment of pre-heated fresh air admixture (for drying processes)
  • Vent connection with restrictor flap
  • Electronic microprocessor PID-controller with continuous power adaption
  • Solid state switching unit
  • Auto-diagnostic system with fault indication
  • Integrated digital timer, preset time from 1min. to 999 hours*
  • Digital display (LED) of set and actual temperature and of (remaining) program time
  • LEDs for indication of program status
  • Display of set function (e.g. loop)
  • Serial interface RS 232 including MEMMERT Software “Celsius 2000” Incl. works calibration certificate for +160°C
Overheat Safety Device
  • Serial overheat controller, adjustable (TWW) protection class 3.1, according to DIN 12 880
Textured Stainless Steel Casing
  • Fully insulated stainless steel door with double locking and 4-point adjustment**
  • Rear zinc plated steel
  • Model 800 has lockable castors
Interior - Heating Concept
  • Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
  • From +30°C up to +220°C***

*      Following function alternatives: ON – for continuous and limited time operation,
        DELAYED OFF – after reaching a preset temperature; to guarantee sufficient
        sterilization time with different load
**    Models 600 and up have two doors
***  However, at least 5°C above ambient for SE and 10° above ambient for SLE models

MODEL WEIGHT (kg) CASING SIZE
w x h x d (mm)
INTERIOR HEATING SIZE
w x h x d (mm)
VOLUME (l) SUPPORT SHELVES
SUPPLIED/AVAILABLE
AVAILABLE VOLTAGE
SE 200 29 550 x 600 x 400 400 x 320 x 250 32 1/3 115 V, 60Hz
230 V, 60Hz
SE 300 32 630 x 600 x 400 480 x 320 x 250 39 1/3 115 V, 60Hz
230 V, 60Hz
SE 400 35 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
SLE 400 40 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
SLE 500 56 710 x 760 x 550 560 x 480 x 400 108 2/5 115 V, 60Hz
230 V, 60Hz
SLE 600 94 950 x 920 x 650 800 x 640 x 500 256 2/7 115 V, 60Hz
230 V, 60Hz
SLE 700 134 1190 x 1080 x 650 1040 x 800 x 500 416 2/9 115 V, 60Hz
230 V, 60Hz
SLE 800 180 1190 x 1620 x 750 1040 x 1200 x 600 749 2/14 115 V, 60Hz
230 V, 60Hz



SLP Sterilizers
Hot Air Sterilizers
Ventilation and Control
  • Quiet air turbine
  • Adjustment of pre-heated fresh air admixture by air flap through process controller (for drying processes)
  • Vent connection with restrictor flap
  • Adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
  • Auto-diagnostic system with fault indication
  • Integrated timer (adjustable from 1 min. up to 999 hours per ramp) for multiramp temperature profiles
  • Multifunctional programming (menu on 5-digit LED digital display)*
  • 5-digit LED digital display for temperature, time, air turbine speed and air flap positions
  • Program stored on power failure
  • Parallel printer interface (incl. Real-time clock with date function) to connect an EPSON ESC/P2 compatible printer for GLP-conforming documentation
  • Serial interface RS 232 including MEMMERT Software “Celsius 2000”
  • Chip-card control incl. One Memory Card XL with 32 kB
  • Incl. works calibration certificate for +160°C
Overheat Safety Device
  • Microprocessor overheat controller, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880
Textured Stainless Steel Casing
  • Fully insulated stainless steel door with double locking and 4-point adjustment**
  • Rear zinc plated steel
  • Model 800 on lockable castors
Interior - Heating Concept
  • Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
  • From +30°C up to +220°C, however at least 10°C above ambient


*    Displays; tempering profiles with several ramps (up to 40); time- and set-point
      dependent operation; air flap adjustable by servo-motor in 10% steps, speed of air
      turbine in 10% steps
**  Models 600 and up have two doors

MODEL WEIGHT (kg) CASING SIZE
w x h x d (mm)
INTERIOR HEATING SIZE
w x h x d (mm)
VOLUME (l) SUPPORT SHELVES
SUPPLIED/AVAILABLE
AVAILABLE VOLTAGE
SLP 400 40 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60 Hz
SLP 500 56 710 x 760 x 550 560 x 480 x 400 108 2/5 115 V, 60Hz
230 V, 60 Hz
SLP 600 94 950 x 920 x 650 800 x 640 x 500 256 2/7 115 V, 60Hz
230 V, 60 Hz
SLP 700 134 1190 x 1080 x 650 1040 x 800 x 500 416 2/9 115 V, 60Hz, 3 phase
230 V, 60 Hz 3 phase
SLP 800 160
180
1190 x 1620 x 750 1040 x 1200 x 600 749 2/14 115 V, 60Hz 3 phase
230 V, 60Hz 3 phase




Contact Us:
99 Willenbrock Rd.
Oxford CT 06478 USA
ph: (203) 267-4600
fax: (203) 267-4606

Copyright © 2004 - 2010 PRO Scientific Inc.