Welcome to PROScientific.com Home | About Us | Distributors Opportunities | Rep Opportunities | Contact Us |       
homogenizers mixers rockers shakers centrifuges memmert
Search:          
     Ovens | Sterilizers | Water / Oil Baths | Incubators | Cooling Incubators | CO2 Incubators


SE & SLE Sterilizers
Hot Air Sterilizers


Ventilation and Control
  • Natural convection
  • Quiet air turbine in ULE models
  • Continuous adjustment of pre-heated fresh air admixture (for drying processes)
  • Vent connection with restrictor flap
  • Electronic microprocessor PID-controller with continuous power adaption
  • Solid state switching unit
  • Auto-diagnostic system with fault indication
  • Integrated digital timer, preset time from 1min. to 999 hours*
  • Digital display (LED) of set and actual temperature and of (remaining) program time
  • LEDs for indication of program status
  • Display of set function (e.g. loop)
  • Serial interface RS 232 including MEMMERT Software “Celsius 2000” Incl. works calibration certificate for +160°C
Overheat Safety Device
  • Serial overheat controller, adjustable (TWW) protection class 3.1, according to DIN 12 880
Textured Stainless Steel Casing
  • Fully insulated stainless steel door with double locking and 4-point adjustment**
  • Rear zinc plated steel
  • Model 800 has lockable castors
Interior – Heating Concept
  • Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
  • From +30°C up to +220°C***

*      Following function alternatives: ON – for continuous and limited time operation,
        DELAYED OFF – after reaching a preset temperature; to guarantee sufficient
        sterilization time with different load
**    Models 600 and up have two doors
***  However, at least 5°C above ambient for SE and 10° above ambient for SLE models

MODEL WEIGHT (kg) CASING SIZE
w x h x d (mm)
INTERIOR HEATING SIZE
w x h x d (mm)
VOLUME (l) SUPPORT SHELVES
SUPPLIED/AVAILABLE
AVAILABLE VOLTAGE
SE 200 29 550 x 600 x 400 400 x 320 x 250 32 1/3 115 V, 60Hz
230 V, 60Hz
SE 300 32 630 x 600 x 400 480 x 320 x 250 39 1/3 115 V, 60Hz
230 V, 60Hz
SE 400 35 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
SLE 400 40 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
SLE 500 56 710 x 760 x 550 560 x 480 x 400 108 2/5 115 V, 60Hz
230 V, 60Hz
SLE 600 94 950 x 920 x 650 800 x 640 x 500 256 2/7 115 V, 60Hz
230 V, 60Hz
SLE 700 134 1190 x 1080 x 650 1040 x 800 x 500 416 2/9 115 V, 60Hz
230 V, 60Hz
SLE 800 180 1190 x 1620 x 750 1040 x 1200 x 600 749 2/14 115 V, 60Hz
230 V, 60Hz


Copyright © 2008 PRO Scientific