|
|
|
Rotanta 460
Hettich Benchtop Centrifuge
Non-Refrigerated/Refrigerated
|
|
|
OPERATING AND FEATURES
- Accommodates various tube systems from 0.2ml to 750ml as well as Qiagen plates, microtitre plates, micronic systems, culture plates and deep well plates
- Microprocessor-controlled
“N” CONTROL PANEL (Standard)
- Clearly arranged, water-protected foil keypad for entering the parameters
- 3 complete running programs can be stored and recalled
- Speed RPM: Input in increments of 10
- Running Time: Input in minutes and seconds, max 99 minutes
- Impulse key for short centrifuging operations
- Relative centrifugal force (RCF): Input in increments of 10
- Change-over RPM/RCF: By entering the rotor radius r/mm the centrifuge will calculate and indicate speed or RCF
- Run up/run down time: Input of acceleration and braking ramps in levels of 1-9 or unbraked run-down
- Display of actual values of the parameters during centrifugation
- Pre-cooling program is standard (CFC-free cooling) with Rotanta 46R model
- Temperature, T/C°: With Rotanta 460R model, Controllable within a range of -20°C to +40°C. Input in increments of 1°C.
“S” CONTROL PANEL (Optional)
- Clearly arranged, water protected foil keypad for entering the parameters
- Ability to store 89 complete running programs
- Speed RPM: Input in increments of 10
- Radius (r): Input in mm when speed or RCF need to be determined
- Running time (t): Input in minutes and seconds, max 999 min.
- Relative centrifugal force (RCF): Input in increments of 1
- Run up/Run down time: Input of acceleration and braking ramps in levels of 1-9, or time-controlled in minutes and seconds. 0 = unbraked run-down.
- Deceleration with brake force cut-off: Input of the cut-off speed in RPM
- Integral of the centrifugal acceleration: provides continuous information on the are exposed to during centrifugation
- Pre-cooling program is standard (CFC-free cooling) with Rotanta 460RS model
- Temperature, T/C°: With Rotanta 460RS model input in increments of 1°C within a range -20°C to +40°C
SAFETY
- Metal housing and metal lid, paneling finished in scratch and impact resistant coating
- The Stainless Steel centrifuging chamber is easy to clean while providing additional safety
- Lid locking
- Lid holding
- Lid dropping protection
- Imbalance switch-off
- Emergency lid lock release
- Viewing port in the lid
- Chamber overheating protection in the Rotanta 460R and Rotanta 460RS
SPEED
- Max. Speed with angle rotor 15,000 RPM, 24,400 RCF
- Max. Speed with swing-out rotor 4,600 RPM, 4,779 RCF
| Model
| Weight (Kg)
| Dimensions W x H x D (mm)
| Available Voltage
| Part Number
|
| ROTANTA 460
| 89.5
| 554 X 453 X 707
|
|
|
| ROTANTA 460R
| 125
| 770 X 453 X 707
|
| |
| Rotor Number
| Rotor Type
| Places
| Tube Size (mL)
| Max RCF
|
| 5624
| SWING-OUT
| 4
| 1 - 750mL
4 Deepwell Plates
16Culture Plates
24 Microtiter Plates
| 4,235
| 4446
| SWING-OUT
| 6
| 1.6 - 250mL
| 3,631
| 4620
| SWING-OUT
| 2
| 2 Deepwell Plates
8 Culture Plates
12 Microtiter Plates
| 5858
6446(460R)
| 5615
| ANGLE
| 6
| 1.5 - 94 mL
| 18,038
| 4489
| ANGLE
| 30
| 0.2 - 2.0 ML
| 24,400
| 5645
| ANGLE
| 6
| 250 mL
| 11,228
14,025(460R)
| 5616
| DISC
| 6
| 25 & 50 mL
| 783 / 805
| | | | | | |
|
|
|
| Copyright © 2008 PRO Scientific
| |