|
|
|
PRO "PC" SERIES HOMOGENIZERS
Programmable Laboratory Homogenizers
|
Responding to a need for homogenizers that can run repetitive batch processing with a minimum of operator attention, PRO developed the computer-interfaced PRO "PC" Series.
The PRO 300PC, PRO 350PC, and PRO 400PC homogenizers, are programmed either from the unit's touchpad, or from your own laptop or desktop computer (serial communication mode RS232). An infinite number of programs can be created and stored, each consisting of up to 23 unique cycles defining speed, run time and pause between each cycle. At any point the PC Series homogenizer can be overridden and manual control resumed.
PRO "PC" homogenizers meet industry requirements for verification of processing and documentation maintenance. As homogenization proceeds, data can be graphed on the computer screen. Both the programs and the data collected (set time and set speed versus actual time and actual speed) can be stored and recalled for screen display or printout.
For further specifications refer to the appropriate model:
PRO 300, PRO 350, and PRO 400
Click here to see available generators
|
PRO 400PC Homogenizer with chamber assembly and 30mm x 150 mm generator
|
| Catalog No.
|
| Homogenizer Description
| 01-01300PC
|
| PRO 300PC Homogenizer Benchtop, variable speed: 2,000 to 28,000 rpm, 3/4 hp, 120 V, 50/60 Hz, 5.8 A. Includes: variable speed motor mounted on a manual PRO TRAC Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
| 01-02300PC
|
| PRO 300PC Homogenizer Benchtop, variable speed: 2,000 to 28,000 rpm, 3/4 hp, 220 V, 50/60 Hz, 2.9 A. Includes: variable speed motor mounted on a manual PRO TRAC Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
| 01-01350PC
|
| PRO 350PC Homogenizer Benchtop, variable speed: 2,000 to 22,000 rpm, 1 hp, 120 V, 50/60 Hz, 6.8 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
| 01-02350PC
|
| PRO 350PC Homogenizer Benchtop, variable speed: 2,000 to 22,000 rpm, 1 hp, 220 V, 50/60 Hz, 3.4 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
| 01-01400PC
|
| PRO 400PC Homogenizer Benchtop, variable speed: 2,000 to 23,000 rpm, 1-3/4 hp, 120 V, 50/60 Hz, 10 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
| 01-01400PC
|
| PRO 400PC Homogenizer Benchtop, variable speed: 2,000 to 23,000 rpm, 1-3/4 hp, 220 V, 50/60 Hz, 5 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
| 80-00100
|
| Vessel Holder Assembly w/ Seperate Support Post Includes: cross rod, post clamp, vessel holder w/ strap and support post
| | | | | | | |
|
|
| Copyright © 2008 PRO Scientific
| |