IPP Incubators

Cooled Incubator
Peltier-Technology

Ventilation and Control

Forced ventilation by Peltier fan
Adaptive, fuzzy-supported microprocessor PID-controller, for stepless control of Peltier-heating/cooling system – without refrigerant Autodiagnostic system with fault indication
Integrated timer (adjustable from 1 min. up to 999 hours per ramp) for multiramp temperature profiles
Multifunctional programming (menu on 5-digit LED digital display)*
5-digit LED digital display for temperature and time
Temperature display (LED-0.1°C resolution)
Program stored on power failure
Parallel printer interface (incl. Real-time clock with date function) to connect an EPSON ESC/P2 compatible printer for GLP-conforming documentation
Serial interface RS 232 including MEMMERT Software “Celsius 2000” Chip-card control incl. One MEMory Card XL with 32 kB
Incl. works calibration certificate for +37°C

Overheat Safety Device

Microprocessor overheat controller, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880

Textured Stainless Steel Casing

Interior – Heating Concept

Fully insulated, easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing
Energy-saving Peltier heating/cooling system (heat pump principle) integrated in rear
Air jacket heating system for gentle all-around thermostating

Temperature Range

Temperature Distribution

Temperature Variation

*     Displays; tempering profiles with several ramps (up to 40); time- and set-point
       dependent operation
       of +16°C up to 32°C

MODEL	WEIGHT (kg)	CASING SIZE w x h x d (mm)	INTERIOR HEATING SIZE w x h x d (mm)	VOLUME (l)	SUPPORT SHELVES SUPPLIED/AVAILABLE	AVAILABLE VOLTAGE
IPP 200	33	550 x 600 x 490	400 x 320 x 250	32	1/3	115 V, 60Hz
						230 V, 60Hz
IPP 300	36	630 x 600 x 490	480 x 320 x 250	39	1/3	115 V, 60Hz
						230 V, 60Hz
IPP 400	53	550 x 680 x 570	400 x 400 x 330	53	2/4	115 V, 60Hz
						230 V, 60Hz