PRO Scientific manufactures homogenizers and laboratory equipment including: centifuges, rockers, shakers and mixers









Home | About Us | Contact Us | Login

Call Toll-Free 1-800-5-THE-PRO
e-mail: sales@PROScientific.com





Incubators

BE Incubator

Electronic Controller


BP Incubator

Process Controller


For additional information please visit Memmert.com


BE Incubators
Precision Incubator
Ventilation and Control
  • Natural convection
  • Continuous adjustment of pre-heated fresh air admixture
  • Vent connection with restrictor flap
  • Electronic microprocessor PID-controller with continuous power adaption
  • Solid state switching unit
  • Autodiagnostic system with fault indication
  • Integrated digital timer, preset time from 1min. to 999 hours*
  • Digital display (LED) of set and actual temperature and or (remaining) program time
  • LEDs for indication of program status
  • Display of set function (e.g. loop)
  • Serial interface RS 232 including MEMMERT Software “Celsius 2000”
  • Incl. works calibration certificate for +37°C
Overheat Safety Device
  • Serial overheat controller, adjustable (TWW) protection class 3.1, according to DIN 12 880
Textured Stainless Steel Casing
  • Fully insulated stainless steel door with double locking and 4-point adjustment**
  • Inner glass door
  • Rear zinc plated steel
Interior - Heating Concept
  • Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
  • From +30 C up to +70 C***

*        Following function alternatives: ON – continuous, DELAYED ON, DELAYED
          OFF – after reaching preset, DELAYED ON/OFF – tempering cycles
**      Models 600 and up have two doors
***    However, at least 5°C above ambient for BE models

MODEL WEIGHT (kg) CASING SIZE
w x h x d (mm)
INTERIOR HEATING SIZE
w x h x d (mm)
VOLUME (l) SUPPORT SHELVES
SUPPLIED/AVAILABLE
AVAILABLE VOLTAGE
BE 200 31 550 x 600 x 400 400 x 320 x 250 32 1/3 115 V, 60Hz
230 V, 60Hz
BE 300 35 630 x 600 x 400 480 x 320 x 250 39 1/3 115 V, 60Hz
230 V, 60Hz
BE 400 38 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
BE 500 54 710 x 760 x 550 560 x 480 x 400 108 2/5 115 V, 60Hz
230 V, 60Hz
BE 600 92 950 x 920 x 650 800 x 640 x 500 256 2/7 115 V, 60Hz
230 V, 60Hz
BE 700 131 1190 x 1080 x 650 1040 x 800 x 500 416 2/9 115 V, 60Hz
230 V, 60Hz
BE 800 178 1190 x 1620 x 750 1040 x 1200 x 600 749 2/14 115 V, 60Hz
230 V, 60Hz



BP Incubators
Precision Incubator

Ventilation and Control
  • Natural convection
  • Adjustment of pre-heated fresh air admixture by air flap through process controller
  • Vent connection with restrictor flap
  • Adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
  • Auto-diagnostic system with fault indication
  • Integrated timer (adjustable from 1 min. up to 999 hours per ramp) for multiramp temperature profiles
  • Multifunctional programming (menu on 5-digit LED digital display)*
  • 5-digit LED digital display for temperature, time and air flap positions temperature display (LED-0, 1°C resolution)
  • Program stored on power failure
  • Parallel printer interface (incl. Real-time clock with date function) to connect an EPSON ESC/P2 compatible printer for GLP-conforming documentation
  • Serial interface RS 232 including MEMMERT Software “Celsius 2000”
  • Chip-card control incl. One Memory Card XL with 32 kb
  • Incl. works calibration certificate for +37°C
Overheat Safety Device
  • Microprocessor overheat controller, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880
Textured Stainless Steel Casing
  • Fully insulated stainless steel door with double locking and 4-point adjustment***
  • Rear zinc plated steel
Interior - Heating Concept
  • Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Temperature Range
  • From +30°C up to +70°C****

*        Following function alternatives: ON – continuous, DELAYED ON, DELAYED
         OFF – after reaching preset, DELAYED ON/OFF – tempering cycles
**      Models 600 and up have two doors
***    However, at least 5°C above ambient for BE models

MODEL WEIGHT (kg) CASING SIZE
w x h x d (mm)
INTERIOR HEATING SIZE
w x h x d (mm)
VOLUME (l) SUPPORT SHELVES
SUPPLIED/AVAILABLE
AVAILABLE VOLTAGE
BE 200 31 550 x 600 x 400 400 x 320 x 250 32 1/3 115 V, 60Hz
230 V, 60Hz
BE 300 35 630 x 600 x 400 480 x 320 x 250 39 1/3 115 V, 60Hz
230 V, 60Hz
BE 400 38 550 x 680 x 480 400 x 400 x 330 53 2/4 115 V, 60Hz
230 V, 60Hz
BE 500 54 710 x 760 x 550 560 x 480 x 400 108 2/5 115 V, 60Hz
230 V, 60Hz
BE 600 92 950 x 920 x 650 800 x 640 x 500 256 2/7 115 V, 60Hz
230 V, 60Hz
BE 700 131 1190 x 1080 x 650 1040 x 800 x 500 416 2/9 115 V, 60Hz
230 V, 60Hz
BE 800 178 1190 x 1620 x 750 1040 x 1200 x 600 749 2/14 115 V, 60Hz
230 V, 60Hz




Contact Us:
99 Willenbrock Rd.
Oxford CT 06478 USA
ph: (203) 267-4600
fax: (203) 267-4606

Copyright © 2004 - 2011 PRO Scientific Inc.