|
|
|
INCO2 Incubators
CO2 Incubators
|
|
|
Ventilation and Control
- Uniform atmosphere and temperature distribution owing to the enclosed non-turbulent ventilation system in working chamber
- Electronic microprocessor PID temperature controller with PT 100
- Integral fault diagnostics on temperature, CO2 and humidity limit control
- CO2-supply via sterile filter, with two connections as well as automatic change-over device for gas bottles
- Digital electronic CO2 control with automatic zeroing (infrared measuring system)
- CO2-supply being interrupted upon door opening
- Digital display of set and actual values (LED-0.°C resolution- of temperature and CO2 concentration
- Digital display of relative humidity incl. integrated humidity limit control (88-97%)
- Program stored on power failure
- Parallel printer interface (incl. Real-time clock with date function) to connect an EPSON LQ/P2 compatible printer (eg. NEC, OKI)
- Serial interface RS 232 including MEMMERT Software “Celsius 2000”
- Heating Concept
- Large-area multi-function heating system on four sides incl. integrated incubation and sterilization stage to prevent contamination (after heating up to 160°C an automatic sterilization process lasting two hours is started)
- Additional door and back heating to avoid condensation
- Including works calibration certificate for +37°C
Overheat Safety Device
- Microprocessor overheat controller, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880
- Audible and visual alarm system
Textured Stainless Steel Casing
- Fully insulated stainless steel door with double locking and 4-point adjustment
- Inner glass door with opening (8mm dia.) to take gas samples
- Rear zinc plated steel
Interior – Heating Concept
- Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, electropolished and hermetically welded
Temperature Range
- From +20°C up to +45° C, however at least 7°C above ambient temperature
| MODEL
| WEIGHT (kg)
| CASING SIZE
w x h x d (mm)
| INTERIOR HEATING SIZE
w x h x d (mm)
| VOLUME (l)
| SUPPORT SHELVES
SUPPLIED/AVAILABLE
| STAINLESS STEEL WATER DISH
| AVAILABLE VOLTAGE
|
| INC 108
| 70
| 710 x 778 x 550
| 560 x 480 x 400
| 108
| 3
| 1
| 115 V, 60Hz
|
| 230 V, 60Hz
|
| INC 153
| 90
| 630 x 938 x 650
| 480 x 640 x 500
| 153
| 3
| 1
| 115 V, 60Hz
|
| 230 V, 60Hz
|
| INC 246
| 110
| 790 x 938 x 750
| 640 x 640 x 600
| 246
| 6, half-width
| 2,half-width
| 115 V, 60Hz
|
| 230 V, 60Hz
|
|
|
|
| Copyright © 2008 PRO Scientific
| |