ICP Incubators
Cooled Incubator
Compression-Type

Ventilation and Control

Additional air circulation in the interior adjustable in 10% steps through controller
No drying-out of the load caused by the cooling device due to separation of thermal jacket from interior (e.g. biological samples)
Adaptive, fuzzy-supported microprocessor PID-controller
Energy-saving use of CFC-free cooling/heating system (refrigerant R134a)
High efficient automatic defrosting system
Auto-diagnostic system with fault indication
Integrated timer (adjustable from 1 min. up to 999 hours per ramp) for multiramp temperature profiles
Multifunctional programming (menu on 5-digit LED digital display)*
5-digit LED digital display for temperature , time and speed of fan (in %)
Temperature display (LED-0.1°C resolution)
Program stored on power failure
Parallel printer interface (incl. Real-time clock with date function) to connect an EPSON ESC/P2 compatible printer for GLP-conforming documentation
Serial interface RS 232 including MEMMERT Software “Celsius 2000” Chip-card control incl. One Memory Card XL with 32 kb
Incl. works calibration certificate for +37°C

Overheat Safety Device

Microprocessor overheat controller, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880

Textured Stainless Steel Casing

Fully insulated stainless steel door with double locking and 4-point adjustment
Inner glass door
Rear zinc plated steel
Model 800 has lockable castors

Interior – Heating Concept

Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing
Air jacket heating system for gentle all-around thermostating

Temperature Range

From 0°C up to +60° C**

*     Displays; tempering profiles with several ramps (up to 40); time- and set-point
       dependent operation; speed of mechanical internal air circulation in 10% steps
**   Optimum performance of cooling aggregate at an ambient temperature
       of +16°C up to 32°C

MODEL	WEIGHT (kg)	CASING SIZE w x h x d (mm)	INTERIOR HEATING SIZE w x h x d (mm)	VOLUME (l)	SUPPORT SHELVES SUPPLIED/AVAILABLE	AVAILABLE VOLTAGE
BE 200	31	550 x 600 x 400	400 x 320 x 250	32	1/3	115 V, 60Hz
						230 V, 60Hz
ICP 400	68	558 x 967 x 486	400 x 400 x 330	53	2/4	115 V, 60Hz
						230 V, 60Hz
ICP 500	87	718 x 1047 x 556	560 x 480 x 400	108	2/5	115 V, 60Hz
						230 V, 60Hz
ICP 600	144	958 x 1335 x 656	800 x 640 x 500	256	2/7	115 V, 60Hz
						230 V, 60Hz
ICP 700	178	1198 x 1495 x 656	1040 x 800 x 500	416	2/9	115 V, 60Hz
						230 V, 60Hz
ICP 800	227	1198 x 1895 x 756	1040 x 1200 x 600	749	2/14	115 V, 60Hz
						230 V, 60Hz

ICP IncubatorsCooled IncubatorCompression-Type

ICP Incubators
Cooled Incubator
Compression-Type