|
|
HOMOGENIZERS - HAND HELD OR POST MOUNTED
|
PRO200 Laboratory Homogenizers
|
- Hand-held or available with optional post/stand easy-lift assembly
- 1/5 hp, high torque, variable speed motor
- 5,000 to 30,000 rpm
- 125 watt
- Speed controlled via thumb slide switch
- Maximum 72dB at full speed, super quiet
- Able to homogenize samples with volumes as small as 0.03 ml to 2 L
- Available in 115 or 220 volt
More Information on PRO200 Homogenizer
|
|
PRO250 Laboratory Homogenizers
|
- Hand-held or available with optional post/stand easy-lift assembly
- 3/4 hp, high torque, variable speed motor
- 10,000 to 30,000 rpm
- 576 watt
- Speed controlled via thumb dial switch (on standard models)
- Able to homogenize samples with volumes as small as .03 ml to 20 L
- Available in 115 or 220 volt
- Optional Digital Speed Control Box or Analog Speed Control Box (with dial knob to control speed) available for variable speed, 0 to 30,000 rpm.
More Information on PRO250 Homogenizer
|
|
HOMOGENIZERS - BENCHTOP
|
|
D Series Homogenizers
|
- Avaliable for 300D, 350D, 400D Homogenizers
- Digital Speed Display
- 3 turn control knob for fine adjustment
- Motorized PRO TRAC stand
- Dual Power Light Indicators
- Sample volume range (min/max): 0.03 ml to over 40 L
- Quiet, less than 68 dB
- Accepts all PRO Generators and Chamber Assemblies
- Also available with Extra Long (EL) stand
More Information on PRO "D" Series Homogenizers
|
|
|
PC Series Homogenizers
|
- Available for 300, 350, and 400 Homogenizers
- Capable of manual or programmable control
- Control and programming is done right on the homogenizers front-mounted touch pad
- Computer interfaced (RS232 serial communications mode), allowing the user to store infinite number of programs
- Each program created can have as many as 23 different cycles with each cycle defining speed, run time and pause before the next cycle
- Data can be graphed on the computer screen as homogenization is occuring
- Both the programs and data collected (set time and set speed versus actual time and actual speed) can be stored and recalled for screen displays or printout
More Information on PRO "PC" Series Homogenizers
|
|
Additional Information
PRO Scientific offers a complete line of homogenizers. PRO Scientific homogenizers come in various configurations to fit your needs. PRO Scientific manufactures hand-held homogenizers, post-mounted homogenizers and programmable homogenizers. Our line of homogenizers can meet any of your processing needs, with the ability to homogenize various volumes (.03ML to 40L) at speeds of up to 30,000 RPM. Utilizing PRO Scientific's generator design, PRO'S homogenizers have been able to insure micro-processing of volumes as low as .03ml in tubes as small as .5ml and macro-processing of volumes up to 40L. In addition, PRO Scientific's sealed chamber systems have afforded homogenizer users the safe, non-aero soling homogenization of pathogens and other sensitive materials. Our product the "Multi-gen 7" generator is "a better alternative than disposable", compliments the PRO Scientific line of homogenizers as the industry's only 316 stainless steel multi-sample processing package. Programmable homogenizers as well as computer-interfaced homogenizers are also available for repetitive batch processing with a minimum of operator attention. PRO Scientific also offers numerous homogenizer accessories for your homogenizer model and as always, we will assist you in any way to make sure your homogenizers are equipped for the tasks you need.
|
| |
|
|
|
Contact Us:
99 Willenbrock Rd.
Oxford CT 06478 USA
ph: (203) 267-4600
fax: (203) 267-4606
Copyright © 2004 - 2009 PRO Scientific Inc.
| |